Chimney Relining in Seattle, WA | Liner Repair & Stainless Steel Replacement | MK Home Services

Chimney Relining & Liner Repair in Seattle & King County, WA

Cracked clay tiles, a flue that was never lined, or a chimney that needs to carry a new insert or appliance. MK Home Services inspects the flue, tells you whether the liner can be repaired or needs replacing, and installs insulated stainless steel and cast-in-place liners.

Schedule a Flue Inspection Call (206) 870-6282
Camera inspection view of cracked clay flue tiles inside a Seattle chimney before relining
Seattle Chimney Relining Specialists

The Liner Is the Part of the Chimney That Keeps the Fire in the Chimney

The flue liner is the inner passage that carries smoke, heat and carbon monoxide up and out of the house. When it is cracked, gapped or missing, heat reaches the wood framing around the chimney, acidic flue gases eat the mortar from the inside, and carbon monoxide has a path into the living space. None of that is visible from the fireplace, which is why liner problems are usually found by camera, not by eye.

MK Home Services relines chimneys across Seattle and King County for wood-burning fireplaces, gas inserts and stoves. Every relining job starts with a camera inspection and a straight answer: repair or replace. Our liner services include:

  • Level 2 camera inspection of the full flue
  • Insulated flexible stainless steel liner installation
  • Cast-in-place relining for badly deteriorated flues
  • Cracked clay tile repair and sealing where the damage is limited
  • Co-linear liners for gas fireplace inserts
  • Removal of broken tiles when a new liner needs the room
  • Top plate, cap and connector sealed and inspected
What Relining Looks Like

Inside a Relined Chimney

A new liner runs the full height of the flue, inside the old clay tiles or the bare masonry, and connects the appliance at the bottom to a sealed cap at the top.

Cutaway of a chimney being relinedAn insulated stainless steel liner inside a masonry chimney with cracked clay tiles, with the top plate and cap, the insulation wrap, the cracked tiles, the tee connection and the firebox labeled. 1 2 3 4 5
  1. Top Plate & Cap

    The liner is sealed to a plate on the crown and finished with a cap, so rain and debris stay out of the new flue. See cap and crown repair.

  2. Insulation Wrap

    A ceramic blanket around the liner keeps flue gases hot. A warm flue drafts better and builds less creosote, which matters in Seattle's cool, damp air.

  3. Cracked Clay Tiles

    The original liner. Thermal shock, moisture and freeze-thaw crack the tiles and open the joints. The new liner runs inside them, or they are broken out if the flue is too tight.

  4. Tee or Insert Connection

    At the bottom, the liner connects to the stove, insert or open fireplace with a sealed tee or adapter. Sizing it to the appliance is what makes the draft work.

  5. Firebox

    Damage here is a separate repair. Cracked firebrick and a bad damper are covered on our wood-burning fireplace repair page.

Liner Types

Stainless Steel, Cast-In-Place or Clay?

Three liner systems cover almost every chimney in King County. The right one depends on the condition of the flue and what is connected to it.

Most relining jobs

Insulated Stainless Steel

A flexible or rigid stainless tube lowered down the existing flue and wrapped in insulation. The standard for retrofitting older masonry chimneys and for connecting inserts and stoves.

  • Handles offsets and bends in the flue
  • Resists the acids in wood and gas exhaust
  • Sized to the appliance for proper draft
  • Usually installed in a day
Heavily damaged flues

Cast-In-Place

A refractory mortar pumped around an inflatable form to create a seamless new flue inside the chimney. It also strengthens masonry that has deteriorated from years of water and heat.

  • Seals every joint and crack at once
  • Adds structural support to weak chimneys
  • Works for open fireplaces with large flues
  • Longest service life of the three
What most older homes have

Clay Tile

Fired clay sections stacked and mortared together when the chimney was built. Inexpensive and long-lived when undamaged, but they crack from thermal shock and cannot be replaced without opening the chimney.

  • Limited cracks can be sealed in place
  • Broken or shifted tiles call for a new liner
  • Joints erode from flue gases over time
  • Common in Seattle homes built before the 1980s

Repair or replace? If the camera finds a few hairline cracks in otherwise sound tiles, a cast-in sealant repair can close them. If tiles are broken, shifted or missing, if joints have eroded, or if you are connecting a new insert or stove, the flue gets a new liner. We show you the camera footage either way.

How to Tell a Liner Is Bad

Signs Your Seattle Chimney Needs Relining

Liner damage hides inside the flue, but it leaves evidence in the fireplace, on the roof and in how the chimney behaves. Any of these is a reason to schedule a camera inspection before the next fire.

In the fireplace

  • Pieces or shards of clay tile on the smoke shelf or firebox floor
  • Flaking, sandy mortar falling from the flue
  • Smoke rolling back into the room or a weak, slow draft
  • Strong smoky or creosote odor when the fireplace is cold

Around the house

  • Warm or discolored drywall next to the chimney
  • White efflorescence or spalling on the brick from moisture inside the flue
  • A chimney fire, even a small one, at any point in the past
  • A new insert, stove or furnace being connected to an old flue

Do not use a fireplace with a known cracked liner. A cracked flue lets heat and carbon monoxide escape into the structure. The NFPA recommends an annual chimney inspection, and a Level 2 camera scan whenever a chimney fire or a change of appliance has happened.

Insulated flexible stainless steel chimney liner ready for installation by MK Home Services
How Relining Works

Inspect, Size, Line, Seal

Most stainless steel relining jobs are finished in a day once the flue has been inspected and the liner sized.

01

Camera Inspection

We sweep the flue and run a camera the full height to document cracks, gaps, offsets and blockages.

02

Repair or Reline

You get the footage and a written quote for the right fix: sealing limited cracks, or a new stainless or cast-in-place liner.

03

Install

Broken tiles are cleared if needed, the liner is insulated and lowered from the roof, and the tee or insert connection is made at the bottom.

04

Seal & Test

Top plate and cap are sealed, joints are checked, and we verify the draft before the first fire.

Chimney Relining Services in Seattle

Every part of the flue, from camera inspection to the cap, handled by MK Home Services technicians.

Level 2 Camera Flue Inspection
Stainless Steel Chimney Liner Installation
Cast-In-Place Chimney Relining
Cracked Flue Tile Repair
Liners for Gas Fireplace Inserts
Liners for Wood Stoves & Inserts

Find Out What Your Flue Looks Like Before the Next Fire

A camera inspection answers the question in one visit: repair the liner or reline the chimney. MK Home Services serves Seattle and all of King County, and every job starts with a written quote.

Call (206) 870-6282 Request an Estimate

Chimney Relining FAQs

It depends on what the camera finds. Limited hairline cracks in clay tiles that are otherwise sound and in place can be sealed with a cast-in refractory repair. Broken, shifted or missing tiles, eroded joints, an unlined flue, or a new appliance that needs a different flue size all call for a new liner. We run the camera first and show you the footage before recommending either.

Clay tile pieces on the smoke shelf or in the firebox, sandy mortar falling from the flue, smoke backing into the room, a strong creosote smell when the fireplace is cold, or warm drywall beside the chimney. Any chimney fire, even a small one, is a reason to have the liner scanned. Many damaged liners show no signs at all, which is why annual inspections include the flue.

It depends on the height of the chimney, the liner type, the flue size the appliance needs, and whether broken tiles have to be removed first. A liner for a wood stove is a different job from relining an open fireplace. Every job is quoted after a camera inspection, so contact us for a quote and you will know the cost before any work begins.

Stainless steel liners typically last 15 to 25 years, cast-in-place liners around 50, and clay tile 50 years or more if it stays undamaged. Moisture, chimney fires, burning wet wood and connecting an appliance the flue was not sized for all shorten that. An annual inspection catches wear before it becomes a safety problem.

No. A cracked flue lets heat reach the framing around the chimney and lets carbon monoxide escape into the house. Stop using the fireplace until the liner has been inspected and repaired or replaced.

Yes. A gas insert vents through a dedicated liner inside the existing chimney, usually a co-linear system that brings air in and sends exhaust out. The old clay flue is too large for the insert's exhaust and would let condensation form, so the liner is part of every insert installation. See our gas fireplace installation page.

Most stainless steel relining jobs are completed in a single day once the inspection and sizing are done. Cast-in-place relining and jobs that require breaking out old tiles can take longer. We give you the timeline with the quote.

In most installations, yes. Insulation keeps the flue gases warm all the way up, which improves draft, reduces creosote and condensation, and is required by many manufacturers and codes for wood-burning appliances. Seattle's cool, damp conditions make a warm flue even more important.

Yes. Relining is designed for exactly that: older masonry chimneys that were built with clay tiles or no liner at all. A flexible stainless liner handles offsets and bends, and a cast-in-place liner can restore a flue whose masonry has deteriorated. If the chimney has leaks or structural damage, those are repaired first; see chimney repair.

Our Chimney Relining Service Area

  • Seattle
  • Bellevue
  • Everett
  • Shoreline
  • Bothell
  • Edmonds
  • Tukwila
  • Marysville
  • Snohomish
  • Lynnwood
  • Kirkland
  • Redmond
  • West Seattle
  • King County
  • Snohomish County
  • Pierce County
  • Tacoma
  • Federal Way
  • Kent
  • Renton
  • Puyallup
  • Burien
  • Sammamish
  • Issaquah
  • Lake Stevens
  • Auburn
  • Mercer Island
  • Woodinville

Get in Touch

Phone

206-910-7084

Hours

Sunday - Friday
8AM to 6PM

Office

123 Main Street, Suite 567 Cityville, State 12345, United States

Step 1 of 2

Skip to content